document number: 93942 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 06-oct-08 1 schottky rectifier, 2 x 5 a 10ctq150s/10ctq150-1 vishay high power products features ? 175 c t j operation ? center tap configuration ? low forward voltage drop ? high frequency operation ? high purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance ? guard ring for enhanced ruggedness and long term reliability ? designed and qualified for industrial level description this center tap schottky rectifier has been optimized for low reverse leakage at high temperat ure. the proprietary barrier technology allows for reliable operation up to 175 c junction temperature. typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. product summary i f(av) 2 x 5 a v r 150 v 10ctq150s 10ctq150-1 d 2 pak to-262 anode 1 3 common cathode base common cathode 2 anode 2 anode 1 3 common cathode base common cathode 2 anode 2 major ratings and characteristics symbol characteristics values units i f(av) rectangular waveform 10 a v rrm 150 v i fsm t p = 5 s sine 620 a v f 5 apk, t j = 125 c (per leg) 0.73 v t j range - 55 to 175 c voltage ratings parameter symbol 10ctq150s 10ctq150-1 units maximum dc reverse voltage v r 150 v maximum working peak reverse voltage v rwm absolute maximum ratings parameter symbol test conditions values units maximum average forward current see fig. 5 per leg i f(av) 50 % duty cycle at t c = 155 c, rectangular waveform 5 a per device 10 maximum peak one c ycle non-repetitive surge current per leg see fig. 7 i fsm 5 s sine or 3 s rect. pulse following any rated load condition and with rated v rrm applied 620 a 10 ms sine or 6 ms rect. pulse 115 non-repetitive aval anche energy per leg e as t j = 25 c, i as = 0.30 a, l = 150 mh 6.75 mj repetitive avalanche current per leg i ar current decaying linearly to zero in 1 s frequency limited by t j maximum v a = 1.5 x v r typical 0.30 a
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 93942 2 revision: 06-oct-08 10ctq150s/10ctq150-1 vishay high power products schottky rectifier, 2 x 5 a note (1) pulse width < 300 s, duty cycle < 2 % electrical specifications parameter symbol test conditions values units maximum forward voltage drop per leg see fig. 1 v fm (1) 5 a t j = 25 c 0.93 v 10 a 1.10 5 a t j = 125 c 0.73 10 a 0.86 maximum reverse leakage current per leg see fig. 2 i rm (1) t j = 25 c v r = rated v r 0.05 ma t j = 125 c 7 threshold voltage v f(to) t j = t j maximum 0.468 v forward slope resistance r t 28 m maximum junction capacitance per leg c t v r = 5 v dc (test signal range 100 khz to 1 mhz) 25 c 200 pf typical series inductance per leg l s measured lead to lead 5 mm from package body 8.0 nh maximum voltage rate of change dv/dt rated v r 10 000 v/s thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg - 55 to 175 c maximum thermal resistance, junction to case per leg r thjc dc operation 3.50 c/w maximum thermal resistance, junction to case per package 1.75 typical thermal resistance, case to heatsink (only for to-220) r thcs mounting surface, smooth and greased 0.50 approximate weight 2g 0.07 oz. mounting torque minimum 6 (5) kgf cm (lbf in) maximum 12 (10) marking device case style d 2 pak 10ctq150s case style to-262 10ctq150-1
document number: 93942 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 06-oct-08 3 10ctq150s/10ctq150-1 schottky rectifier, 2 x 5 a vishay high power products fig. 1 - maximum forward voltage drop characteristics (per leg) fig. 2 - typical values of reverse current vs. reverse voltage (per leg) fig. 3 - typical junc tion capacitance vs. reverse voltage (per leg) fig. 4 - maximum thermal impedance z thjc characteristics (per leg) 100 10 1 v fm - forward voltage drop (v) i f - instantaneous forward current (a) 0 2.5 0.5 1.0 1.5 2.0 3.0 t j = 25 c t j = 175 c t j = 125 c v r - reverse voltage (v) i r - reverse current (ma) 0.0001 0.001 0.01 0.1 1 0 25 50 75 100 125 150 10 100 t j = 175 c t j = 150 c t j = 125 c t j = 100 c t j = 75 c t j = 50 c t j = 25 c 1000 100 v r - reverse voltage (v) c t - junction capacitance (pf) 0 10 40 140 8 0 120 160 20 60 100 t j = 25 c t 1 - rectangular pulse duration (s) z thjc - thermal impedance (c/w) 0.001 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 p dm t 1 t 2 n otes: 1. d u ty factor d = t 1 /t 2 2. peak t j = p dm x z thjc + t c single p u lse (thermal resistance) d = 0.75 d = 0.50 d = 0.33 d = 0.25 d = 0.20
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 93942 4 revision: 06-oct-08 10ctq150s/10ctq150-1 vishay high power products schottky rectifier, 2 x 5 a fig. 5 - maximum allowable case temperature vs. average forward current (per leg) fig. 6 - forward power loss characteristics (per leg) fig. 7 - maximum non-repetitive surge current (per leg) fig. 8 - unclamped inductive test circuit note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 6); pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = 10 v i f(av) - average forward current (a) allowable case temperature (c) 120 130 140 150 160 170 1 8 0 0246 8 dc see note (1) s qu are w a v e (d = 0.50) 8 0 % rated v r applied i f(av) - average forward current (a) average power loss (w) 0123456 8 0 1 2 4 7 3 5 d = 0.20 d = 0.25 d = 0.33 d = 0.50 d = 0.75 rms limit dc t p - square wave pulse duration (s) i fsm - non-repetitive surge current (a) 10 100 1000 10 000 100 1000 at any rated load condition and w ith rated v rrm applied follo w ing s u rge c u rrent monitor high-speed s w itch d.u.t. r g = 25 + free w heel diode v d = 25 v l irfp460 40hfl40s02
document number: 93942 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 06-oct-08 5 10ctq150s/10ctq150-1 schottky rectifier, 2 x 5 a vishay high power products ordering information table 1 - current rating (10 a) 2 - circuit configuration c = common cathode 3 - t = to-220 4 - schottky ?q? series 5 - voltage rating (150 = 150 v) 6 - s = d 2 pak -1 = to-262 7 - none = tube (50 pieces) trl = tape and reel (left oriented - for d 2 pak only) trr = tape and reel (right oriented - for d 2 pak only) 8 - none = standard production pbf = lead (pb)-free device code 5 13 24 678 10 c t q 150 s trl - links to related documents dimensions http://www.vishay.com/doc?95014 part marking information http://www.vishay.com/doc?95008 packaging information http://www.vishay.com/doc?95032
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
